DIY Loft Full Size Bed

Mar 2nd

DIY Loft Full Size Bed – Loft beds are the good solution for small room. Loft beds is save a large enough space, without sacrificing comfort and balance your room. Although many loft beds are double size with a full size bed it is best for one person or a couple looking for more sleeping space.

DIY Loft Full Size Bed krovat
DIY Loft Full Size Bed krovat

Cut four 2-b-8-by-96-inch boards on both sides of the rail measuring 80 inches long and two end rail measuring 56 inches long to build a loft full size bed. Wooden boards Saw two 2-by-2-by-96-inch two slats support slats that measure 77 inches long. Divide eight boards 2 by 4 by 120 – inch wooden slats 10 which measure 56 inches long, four rungs of the ladder that measure 59 inches long and a center of the support beam measuring 77 inches long. Determine the desired height of the bed and cut four 4-by-4-by-96-inch boards in the legs equal to this amount, less than 5 1/2 inches. Cut two sheets 2 by 8 – foot plywood 3/4-inch in two pieces measuring 38 1/2 by 56 inches. Create a butt joint by placing the perpendicular end rails to the side rails, flush with the ends to form a rectangle yet. Secure each set with five countersunk screws 3 inches.

12 Photos Gallery of: DIY Loft Full Size Bed

Image of: DIY Loft Full Size Bed krovat
Image of: DIY Loft Full Size Bed ideas
Image of: Built DIY Loft Full Size Bed
Image of: attractive DIY Loft Full Size Bed california
Image of: adult DIY Loft Full Size Bed lights
Image of: wonderfulv DIY Loft Full Size Bed twin
Image of: Metal DIY Loft Full Size Bed computer
Image of: loft bed with desk and stairs 6
Image of: gray DIY Loft Full Size Bed ladder
Image of: Full DIY Loft Full Size Bed
Image of: formidable DIY Loft Full Size Bedchairs
Image of: DIY Loft Full Size Beds
 
RELATED :   Contemporary Bed Set Furniture

To build loft full size bed apply strong wood glue to the inner surface of each slat cleat support and hold them inside the frame, at least 2 inches from the bottom. When the glue sets, secure it with a screw 3 inches placed every 6 inches. Screw the central support beam in place in the middle of the bed with 4 – inch screws. Place the slats through fastening systems, evenly spaced, and nail them in place with 3 – inch nails. Nail plywood sheets over the slats with 2 – inch nails. Turn the structure upside down and tail of each leg inside each joint, against the bottom of the slats 2 by 2 inches. Hold each leg in place. When the glue is set, drill a hole 5/8 inch through the bed frame and leg and secure the leg to the table with a 6-inch long thick 5/8 bolt and a nut. Support of bed and screw each rung of the ladder at the foot of the bed, spaced evenly between the two legs.

RELATED :   Advantages of Bed Wedge Pillow